Operation Table

 Web: www.clovermedical.net    Email: sales@clovermedical.net

Home  

Medical Equipment

Hospital Furniture

Medical Disposable

Contact Us

 

 

Product Code:  KW-3008 series Operating table

3008 series Operating table intends for surgical operations on head, neck, pleuroperitoneal cavity, perineum, limbs, etc. in hospitals. Oil pump provides hydraulic elevation; operating table controlled on the two sides to achieve the required position.

Product Code:  KW-3008
Specifications:
Length: 2100mm
Width: 480mm
Height: 800-1050mm
Trendelenburg forward:...=55
Trendelenburg backward:..=25
Lateral decline..........=20
Head section upward:.....=45
Head section downward:...=90
Back section upward:.....=80
Back section downward:...=10
Seat section lifting:....=120mm
Leg section downward:....=90

Product Code:   KW-3008A,specifications are the same as 3008
The base is made of stainless steel

Product Code:   KW-3008B,specifications are the same as 3008,
The cover and base are made of stainless steel, with detachable legs. 

Product Code:   KW-3008C,specifications are the same as 3008,The cover and base are made of stainless steel, with detachable legs and x-ray frame.

Product Code:  KW-3008D the base seat of the bed is made of stainless steel.

Product Code:  KW-3001 series Operating table

This series operating table intends for surgical operations on head, neck, pleuroperitoneal cavity, perineum, limbs, etc. in hospitals. Oil pump provides hydraulic elevation; operating table controlled on the two sides to achieve the required position.

Product Code:  KW-3001
Specifications:

Length: 2100mm
Width: 480mm
Height: 800-1050mm
Trendelenburg forward:..... =20
Trendelenburg backward:.... =30
Lateral decline............ =18
Head section upward:.....=45
Head section downward:...=90
Back section upward:.....=75
Back section downward:...=18
Seat section lifting:....=120mm
Leg section downward:....=90

Product Code:  KW-3001A,specifications are the same as 3001
The cover and base are made of stainless steel

Product Code:  KW-3001B, the base is made of stainless steel
The cover and base are made of stainless steel

Product Code:  KW-3001C , the base is made of cold board which is treated by static spray, double beds, the leg board are separated and dischargeable, can take X-ray.  

Product Code:  KW-3001D , the base is made of stainless steel, double beds, can take X-ray.

Product Code:  KW-3001E, the base is made of stainless steel, the leg board are separated and dischargeable,  double beds, can take X-ray.

Product Code:  KW-1
Specifications:
Length: 2100mm
Width: 480mm
Height adjustment range: 800-1050mm
Main Technical Parameters:
Back section upward:.....=90
Back section downward:...=20
Head section upward:.....=45
Head section downward:...=90
Leg section downward:....=90
waist section elevation:.=120mm

Product Code:  KW-1A,specifications are the same as KW-1
The cover and base are made of stainless steel

Product Code:  KW-2
Specifications:

Length: 1950mm
Width: 600mm
Height adjustment range: 800-1050mm
Back section upward:.....=45
Back section downward:...=10
waist section elevation:.=120mm

Product Code:  KW-2A, specifications are the same as KW-2
The base is made of stainless steel

Product Code:  KW-2B, specifications are the same as KW-2
The cover and base are made of stainless steel

Product Code:  KW-2C
Specifications:

Length: 1965mm
Width: 600mm
Height adjustment range: 750-1000mm
Main Technical Parameters:
Back section upward:.....=60
Back section downward:...=10
Table forward angle:.....=10
Table backward angle:....=20

Product Code:  KW-2D
Specifications:

Length: 1965mm
Width: 600mm
Height adjustment range: 750-1000mm
Main Technical Parameters:
Back section upward:.....=60
Back section downward:...=10
Table forward angle:.....=10
Table backward angle:....=20
Power supply:............220V,50Hz
Power input:.............120VA

Product Code:  KW-2E
Specifications:

Length: 1960mm
Width: 600mm
Height adjustment range: 750-1000mm
Main Technical Parameters:
Back section upward:.....=50
Table forward angle:.....=10
Table backward angle:....=20
Power supply:............220V,50Hz
Power input:.............150VA

Product Code:  KW-3
Specifications:

Length: 1900mm
Width: 600mm
Height: 800mm
Back section upward:.....=50
Back section downward:...=20
Seat section upward:.....=30
Seat section downward:...=10
Leg section upward:......=30
Leg section downward:.....=30

Product Code:  KW-3A,specifications are the same as KL-3
Stainless steel type

Product Code:  KW-4
Specifications:

Length: 1400mm
Width: 500mm
Height: 750mm
Back section upward:.....=30
Back section downward:...=15

Product Code:  KW-4A,specifications are the same as KL-4
Stainless steel type

Product Code:  KW-5
Specifications:

Length: 1900mm
Width: 600mm
Height: 800mm
Back section upward:.....=50
Back section downward:...=20
Leg section downward:....=90


Product Code:  KW-5A,Stainless steel type

Product Code:  KW-6
Specifications:

Length: 1500mm
Width: 450mm
Height: 1000mm
Traction movenment:0-130mm
Tranction angle:0-180 

Product Code:  KW-DI is a multi-functional operating table and can be adjusted to very low position, which meets the requirements for not only various surgical operation but also X-ray examination and photography of different parts of human body. Small-sized touch controller ensures precise and reliable adjustment of different positions. The exterior surface being made of stainless steel, the table gives a beautiful appearance and is corrosion resistant. It is an ideal choice for surgical operations. The table adopts electro-hydraulic control, and has small-sized touch controller for flexible operation. It adopts famous brand engine hydraulic pump and electromagnetism valve which are imported from Japan. It makes low level of noise and it is reliable in performance.

Product Code:  KW-DIA: Leg board separated and detachable, waist board can be lifted.

Product Code:  KW-DIB: Leg board foldable electrical controlled, waist board can be lifted.

Product Code:  KW-DII is widely used in various surgical operations. With the delicately designed eccentric column, the table is especially fit for X-ray photography in surgical operation. The shell of the complete device is made from stainless steel. It is corrosion resistant, can be easily cleaned, and gives a beautiful appearance. The table adopts electro-hydraulic control and it has small-sized touch controller for flexible operation. It adopts famous brand engine hydraulic pump and electromagnetism valve which are imported from Japan.It makes low level of noise and is reliable in performance

Product Code:  KW-DIII meets the requirements for various surgical operations on brains, eyes, etc.The table adopts micro touch controller, with which, the operating table can be adjusted according to requirements. The complete hydraulic control system adopts imported components, ensuring low noise level and safety and reliability in operation. The complete table can be moved back and forth. The table has AC/DC automatic shift and restoration. It can do C arm and X-ray photography and examination.

Product Code:  KW-DLA is a multi-functional operating table,which not only meets the requirements of various surgical operations but also can conduct C arm and X-ray examination and photography on different parts of the body. The foundation uses the high quality stainless steel,the floor uses the high quality coal to model the board,is advantageous for the clean,the disinfection.This operation table adopts the world famous brand-LINAK gear pump as the driving force of all movements,manipulating through the hand-controller.It is characterized by flexible,reliable,non-pollution and long usage time.

Product Code:  KW-DLB is a multi-functional operating table ,which not only meets the requirements of various surgical operations but also can conduct X-ray examination and photography on different parts of the body.  The base is made of stainless steel and the table board is made of carbon board, so they are  easy to clean and sterilize. The operating table adopts the world famous brand LINAK motor gear  pump as the driving force for the up and down movement while other movements are pneumatically actuated or performed by hand movement, so the operating board possesses such characteristics as flexible, reliable, pollution-free and durable.

Product Code:  KW-DLC  electric operating table is of the Integrated multi-function type, which meets the demands of all kinds of operation. It can also be used for conducting X-ray examination and photography.The base is made of high-quality stainless steel, while the table-board is made of High-quality carbon plastic plate, which is easy to clean and sterilizing. The operating table adopts the world famous brand LINAK motor gear pump as the actuator for all kinds of motion while conducting orders by hand-held controller button, thus possessing such characteristics as flexible, reliable, pollution-free and durable

Product Code:  KW-12B serves as a multi-purpose operation table, suitable for thoracic abdominal surgery, cerebrial surgery, ENT, gynecology and obstertrics as well as urology surgery.   Summary of features and properties: 
1.Integrated hydraulic system which ensures the reliability of the table. 
2.Superior stainless steel housing for the basement and support system of the table makes cleaning and sterilization an easy matter. Ergonomic design provides the table with a clear cut. All mattress are cast and made from polyester rubber.
3.The back section of the table is movable, on which an elevator can be fit for the operation on kidney or gall-bladder.
4.The surfaces of the table are made of plexi glass. By putting the x-ray film container between the upper and bottom deck of the table, radiographic examination can be carried out without moving the patient.
5.All the clamps for fixing the accessories are detachable and easy to use .
6.With the head rest and the double-sheet arm rest (optional accessories), the cerebral surgery and lateral surgery are convenient. 

Specification: 

Table board:                       

270480mm(LW)

Height of table:                    

minimum of height 650mm adjustment over 220mm

The lateral adjustment :       

-15to  +20

Back section:                     

adjustment up to +75

Head section:                     

upward up to 35 

                        

downward up to 90 

Leg section abductable  

up to 180(90either side)

down position 

up to 90  detachable.

Foot section level with or vertical to table board

detachable

Elevator range of kindney bridge:

>80mm

Power Supply:

220V,50HZ 

Electric motor:

singel phase ,defferential pace,370W 1400rpm 

Optional accessories

Double deck arm rest
Neurosurgery head rest   

Mandatory accessories: 
1.Anaesthesia screen
2.X-ray film cassette
3.Kidney bridge
4.Side supports
5.Shoulder supports
6.Knee crutches
7.Arm rest
8.Body strap
9.Mattress 
10.Cushions 

Product Code:  KW-12D serves as a multi-purpose operation table, suitable for thoracic abdominal surgery cerebrial surgery, ENT, gynecology and obstertriocs as well as urology surgery. 

Table board:

2060x550mm(LxW)

Min height of table board:

550mm

Elevating range:

300mm

Longitudinal shift of table board:

200mm

Head section:

-90 ~ 35, detable

Should section:

-25 ~ 35

Back section:

-15 ~ 75

Leg section:

-90 ~ 0, detable

Trendelenburg adjustment:

0 ~ 20

Antitredelenburg adjustment:

0 ~ 15

Lateral tilt of table board:

Left ward: 0 ~ 15

Right ward:0 ~ 15

Summary of Features and Properties:
1.The operating table is controlled by microprocessor. Two control panels are available, which is suitable for operation from different position. Locking keys are designed to avoid false operating. 
2.Integrated hydraulic system adopts imported components, which guarantees low noise feature and ensures the reliability of the talbe. 
3.Extra low position has been designed especially for cerebral and ophthaim surgery. Doctor is able to take a seat druing operation. 
4.The whole table's top can be moved forward, backward, leftward and rightward, which permits maximum full body use for a C-am,X-ray unit. 
5.Extra width of table meets today's olinical requirement. 
6.DT12-D is divided into five sections. including head section, shoulder section, body section, pelvis Section and Leg section. The surfaces of these sections are made of radiolucent material. By putting the x-ray film container between the upper and bottom deck of the table, radiographic examination can be carried out without moving the patient. 
7.The movement of all sections are controlled by electric-driven hydraulic controlled system, except for Head Section and Leg Section, which is made manually. 
8.Shoulder section and body section can be elevated, which make surgeries on gallbladder and kidney much easier. 
9.The maneuverability and stability table base is fiexible and reliable. 
10.With wide range of accessories, the table is suitable for all kinds of operation.
11.The whole unit is in accordance with the National Safety Standard for medical electric appliance.
12.The operating table is compact in structure and new in design.

Optional accessories:
Anaesthesia screen
Knee crutches
Body Support
Mattress
Cassette Support   
Body strap

Electric Operating Table   Product Code:   KW-12E

Specitication:

Tabletop length 2000mm
Tabletop width 520mm
Tabletop height adjustment range 740~1120mm
Trendelenburg 25
Lateral tilt 15
Head section adjustment range Upward 0~20, Downward 0~30, detachable
Back section adjustment range Upward 0~25, Downward 0~25
Seat section adjustment range Upward 0~75, Downward 0~40
Leg section adjustment range Downward 0~85, Abduction 0~180
Foot section adjustment range Upward 0~10, Downward 0~70

Technical data:

Total length of tabletop:2000mm
Width of tabletop:520 mm
Elevation of tabletop:7401120 mm
Trendelenburg movement:25
Lateral movement:15
Head section upward:25 Head section downward:25
Back section upward:75 Back section downward:40
Leg section upward:70 Leg section downward:90
Power:AC 220 V, 50 Hz
Storage battery:24V, 24Ah

Standard accessories:
- Anaesthesia screen 1 pce
- Body support 2 pcs
- Knee crutch 2 pcs
- Arm rest 2 pcs
- Body strap 1 pce
- Clamps 7 pcs

Optional accessories:
- double deck sheet arm rest
- multipurpose head rack
- orthopedic tractor
- simple head rest
- accessories trolley
- X-ray film cassette holder

KW-12F electrical operating table is a new version of high level electrical operating table, which adopts a unique stand column supporting the tabletop at the head end. This structure makes the tabletop locate in the place outside the area covered by supporting column, and provide a maximum space for the X-ray examination. The tabletop of KW-12F is well contrived to meet the neurosurgery demand, by designation of four sections with wide angle turnings, which enables the table to form most kinds of postures required in the sophisticated neurosurgery. This is the first choice of a operating table for neurosurgeons

KW-12F contains enormous functions including one key resetting, two control panels--wire remote controller and emergency table mount controller, and in addition, it has provided an options for additional wireless controller.

KW-12 F integrates two independent hydraulic and control system, and is either run by DC (as medical safety power source) or by AC power (as emergency standby power), while all the key parts are sourced from international first rate companies for high reliability and leading technology. Equipped with different accessories, the KW-12F is also possible for all purpose of surgeries in different levels of hospitals

Technical data:

Total length of tabletop:2000mm
Width of tabletop:520 mm
Elevation of tabletop:7401120 mm
Trendelenburg movement:25
Lateral movement:15
Head section upward:25 Head section downward:25
Back section upward:75 Back section downward:40
Leg section upward:70 Leg section downward:90
Power:AC 220 V, 50 Hz
Storage battery:24V, 24Ah

Standard accessories:
- Anaesthesia screen 1 pce
- Body support 2 pcs
- Knee crutch 2 pcs
- Arm rest 2 pcs
- Body strap 1 pce
- Clamps 7 pcs

Optional accessories:
- double deck sheet arm rest
- multipurpose head rack
- orthopedic tractor
- simple head rest
- accessories trolley
- X-ray film cassette holder

Product Code:  KW-YSA  electric Ophthalmic operating table is a kind of Ophthalmic equipment which is designed and developed for the special requirement of operation. The up and down movement of the table board adopts the electric and hydraulic cylinder working principle. The operating table also possesses the  Ultra-low-position design and its motors and electromagnetic valves are  all imported ,it works smoothly, noise free with high reliability. The head board is matched with Manually adjustable up and down mechanisms, which can be folded upward and downward, thus providing the best point view of the operation.

Product Code:  KW-JT1

Features:
Oil pump adopts new-designed structure. To elevate the table top, just depress the pedal; To lower the table top, just depress the pedal to its lowest position.
With compact and reasonable structure, this table guarantees superior performance and reliable quality. The operations for JT-1 are made manually and are very easy.
During design, we take ergonomics into consideration, which results in its attractive apperance and easy operation for cleaning and sterilization.
All accessories can be detached with clamps.
With brake under the table ,the whole unit is very easy to transport, move or clean.
A new design of handle makes it more flexible for most of adjustments. When it is not in use ,the handle can also be detached.
All adjustments are to be carried out at the left side of the table, which makes adjusting process more convenient.
Due to its perfect design, the table can be elevated smoothly and stably.

Product Code:  KW-JT1A

The mechanical operating table model KW-JT1A is suitable for operating on head,neck, abdomen,chest,legs and so on in general surgery as well as gynaecological and urlolgical surgery in nospitals and clinics.
Characteritic:
1.The new type of oil pump adopted in hydraulic pressure elevating and lowering system makes elevation very easy,the other operations are made manually.
2.It has a compact and reasonable structure,and a superior performance and quality.
3.The protective cove for table column is made of stainless steel.
4.It's designed with new and fine art on the table's outline which is easy for cleaning and sterilization.
5.All accessories can be detached with clamps. 6.By switching brake the table is convenient for transportation,moving and cleaning.
7.A new design of handle which is flexible is used for most of adjustments.
8.All adjustment are to be carried out at the left side of the table to make operations at most convenient.
9.A unique features of smooth elevation.