Infusion Pump & Syringe Pump

 Web: www.clovermedical.net    Email: sales@clovermedical.net

Home   Medical Equipment Hospital Furniture Medical Disposable Contact Us
 

Infusion Pump (8 models)

 

 

Product Code: SYT-A6 Ambulatory PCA Infusion Pump

Ideal solution for infusion treatment for home care and hospital use such as: Antibiotics, Epidural, Post-operative pain management, Pulmonary arterial hypertension (PAH/Flolan)

Flow rate option: 1, 2, 3, 4, 6, 8, 10 ml/h
Precision: ±10 %
P.C.A. Function (Patient-Controlled Analgesia):Adding ¼ of preset dosage by PCA button without interruption of current infusion.
Min. 30 minutes interval for safety protection.
Dimensions:140 (L) x 95 (W) x 35 (D) mm / 5.12” (L) x 3.74” (W) x 1.38” (D)
Weight:200 g / 0,44 lb (1 engine with 1 empty 100 ml) reservoir)
Carton content:
50 x Reservoirs (100 ml or 260 ml)
1 x pump (free with 50 reservoirs)
1 x Carrying bag

Product Code: SYT-A Volumetric Infusion Pump
Product Code: SYT-A8 Volumetric Infusion Pump, Dual infusion mode, Adjustable Occlusion,Adjustagble Bolus, Multi-language
Product Code: SYT-200  Infusion pump

Compatible with IV sets of any brand with high accuracy.
Automatically calibration for IV sets of any brand.
Three working modes: Drop counting control,Rate control and Time control mode.
8 Hours internal battery life in high capacity.
Have a unique color LCD and an internal battery with a high capability.
Switch between ml/h and drops/min freely.
Three levels of alarm volume: high, medium and low.
Three levels of occlusion pressure: high, medium and low.
KVO function: When finish the total volume of an infusion,   the pump will alarm and enter KVO state. 

SPECIFICATIONS
Controls:
Drop counting and adjusting the delivery rate automatically
Pump Type: Peristaltic finger
Applicable IV Sets:
Compatible with IV sets of any standard(including lucifugal IV sets)
Accuracy:
≤25drop/min: ±2%, >25drop/min:±3% (With the drop counting control mode)
±5% (With the rate control mode after the correct calibration)
Delivery Rate Range:
1~400drop/min(1drop/min step)
1.0ml/h~1200ml/h (1.0ml/h~99.9ml/h, 0.1ml/h step; >99.9ml/h, 1ml/h step)
Delivery Time Range: 1min~1999min (1 min step)
Volume Limit Range: 0~9999ml (1 ml step)
Total Volume Range: 1~9999ml (1 ml step)

Rapid injection: 600ml/h
KVO Rate:
When the delivery rate≤10ml/h, KVO is 1 ml/h. Ot herwise KVO is 3ml/h.
Alarms:
Air-in-line, Infusion complete when limited volume has been set, Empty container, Occlusion, Door is open, waiting time Over, No drop been detected, Operational errors, Low battery, other device failures.
Power Supply:
AC power supply: AC 100 to 240V±10%,50/60Hz;
Internal LI Battery: 11.1V, 2000mAh. 8 Hours of continous operation on a new fully charged battery with the rate of 20 drops/min.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type CF
Dimensions: 130mm(L)× 200mm(W) × 230mm(H)
Net Weight: Approximately. 2.5kg
Operating Conditions: Ambient temperature: 5 to 40℃ Relative humidity: 20 to 90%
Storage Conditions: Ambient temperature: -10 to 55℃ Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual

Product Code: SYT-S601 Infusion pump

● Flow rate range from 1-600ml/h.
● Unique door-free structure and big LCD screen,making it easier and more convenient to operate and in the meanwhile avoiding problems of pump  stuck and fluid leakage.
● Unique function of bedside infusion supervision, making patients and their relatives more assured while              
also reducing nurses' workload. If used with 2000I and 900I,
a bed No.can be set in the machine and  then its infusion progress and alarm information can be  
displayed on 2000I(Infusion Supervision System )located at Nurse's Station and on 900I(Nurse  
Beeper).The nurse, upon seeing and hearing the signal, can go and handle the unit accordingly.
● All brands of standard IV sets are compatible. With only a simple calibration, it can guarantee an accurate, smooth and safe infusion.
● When detecting air in line or occlusion, an audio and visual alarm signal shall be given instantly while at
the same time the machine stops operation automatically, thus reducing the danger of air embolism to patients.
● The infrared sensor shall give alarm signal when detecting excessive air pressure.
● Application of double CPU, making the infusion process safer and more reliable.
● Alarm signals are given in case of malfunction or operation error and the machine stops operation  
  automatically.

Product Code:

SYT-S601

 

Max.size of outer shell

120*140*190 mm(length*width*height)

Bolus

600ml/h

Alarm functions

Over,OCCL.,AIR,low battery, control abnormal, no AC power supply, installation error.

Flow rate range

1-600ml/h

Displayed information

Rate, volume limit, accumulated volume, power indicator light, bed No.,AIR,OCCL.,OVER.

Volume limit

1-9999ml

Max.weight

<2.0kg

Accuracy

±5%

Classification

Type ,BF

KVO flow rate

1ml/h,keep vein open(KV))rate

Outer shell material

ABS plastic

Max.power

consumption

 

25W,can run for more than 5 hours continuously after being fully recharged.

Operating conditions

Environment temperature +5℃~40℃ ,atmosphere pressure 86~106kPa, relative humidity20%~90%

Power supply

AC100-240V,50/60 Hz,25VA

Storage and transport conditions

Environment temperature -15 ℃~+50℃ ,atmosphere pressure 86~106kPa, relative humidity20%~90%.

Battery

Rechargeable lithium polymer battery,7.4V,1650mAh

Applicable infusion set

All standard infusion sets.

Certification

CE0197

EMC

Comply with EN60601-1-2

Work mode

Continuous work mode

Fuse

220V 2A*2,  12V 2A*2

Water proof

IP21

Electrical Shock Proof

Battery:Class :AC Power:Type BF.

Battery recharge

When the pump is connected to the AC power supply, turn on the power and the battery will automatically recharge (about 8-14 hours to recharge fully).

Applied standards

Comply with standard of EN ISO 14971:2000,IEC 60601-1:1995,EN IEC  60601-1-2:2001,IEC 60601-2-24,EN ISO 14155-1:2003,EN 980:2003,EN 1041:1998,MDD 93/42EEC

Product Code: SYT-S601B Infusion pump

● Flow rate range from 1-2000ml/h.
● Unique door-free structure and big  LCD screen, making it easier and more convenient to operate and in the meanwhile
avoiding problems of pump  stuck and fluid leakage.
● Unique function of bedside infusion supervision, making patients and their relatives more assured while also reducing nurses' workload. If used with 2000II and 900I, a bed No. can be set in the machine and then its infusion status and alarm information can be displayed on 2000II (Infusion Supervision System ) located at Nurse's Station and on 900I (Nurse Beeper).The nurse, upon seeing and hearing the signal, can go and
handle the unit accordingly.
● All brands of standard IV sets are compatible. With only a simple calibration, it can guarantee an accurate, smooth and safe infusion.
● When detecting air in line or occlusion, an audio and visual alarm signal shall be given instantly while at the same time the machine stops operation automatically, thus reducing the danger of air embolism to patients.
● The infrared sensor shall give alarm signal when detecting excessive air pressure.
● Application of double CPU, making the infusion process safer and more reliable.
● Alarm signals are given in case of malfunction or operation error and the machine stops operation automatically.

Product Code:

SYT-S601B

 

Max.size of outer shell

120*140*190 mm(length*width*height)

Bolus

2000ml/h

Alarm functions

Over,OCCL.,AIR,low battery, control abnormal, no AC power supply, installation error.

Flow rate range

1-2000ml/h

Displayed information

Rate, volume limit, accumulated volume, power indicator light, bed No.,AIR,OCCL.,OVER.

Volume limit

1-9999ml

Max.weight

<2.0kg

Accuracy

±3%

Classification

Type ,BF

KVO flow rate

1ml/h,keep vein open(KV))rate

Outer shell material

ABS plastic

Max.power

consumption

 

25W,can run for more than 5 hours continuously after being fully recharged.

Operating conditions

Environment temperature +5℃~40℃ ,atmosphere pressure 86~106kPa, relative humidity20%~90%

Power supply

AC100-240V,50/60 Hz,25VA

Storage and transport conditions

Environment temperature -15 ℃~+50℃ ,atmosphere pressure 86~106kPa, relative humidity20%~90%.

Battery

Rechargeable lithium polymer battery,7.4V,1650mAh

Applicable infusion set

All standard infusion sets.

Certification

CE0197

EMC

Comply with EN60601-1-2

Work mode

Continuous work mode

Fuse

220V 2A*2,  12V 2A*2

Water proof

IP21

Electrical Shock Proof

Battery:Class :AC Power:Type BF.

Battery recharge

When the pump is connected to the AC power supply, turn on the power and the battery will automatically recharge (about 8-14 hours to recharge fully).

Applied standards

Comply with standard of EN ISO 14971:2000,IEC 60601-1:1995,EN IEC  60601-1-2:2001,IEC 60601-2-24,EN ISO 14155-1:2003,EN 980:2003,EN 1041:1998,MDD 93/42EEC

Product Code: SYT-602 Infusion pump
 Three kinds of modes: Rate Mode, Time Mode, Body Weight Mode.
 Unique door free structure: Avoiding problems of pump stuck and fluid leakage.
 Double CPU: Making the process of infusion safer and more reliable.
 Accurate Injection: Precise control of the infusion rate and infusion volume.
 Flow rate range: 1.0 ml/h-2000.0 ml/h.
 Driven by step motor: No pulsating wave will be educed even during low-rate
injection.
 Alarm is given in the following situations: Infusion Completion, Occlusion,
Low Battery, Air Bubble, Installation Error, Malfunction or Operation Error.
 IV Set: All brands of standard IV sets are compatible.
 KVO rate can be selectable according to concrete requirements from 1.0 ml/h to 5.0 ml/h.
 Wireless Module Control: When used with SK-2000I or SK-900I, the infusion information will be transferred to the Infusion Supervision System in order to ensure the patients’ safety.  Big Color LCD.

 

Dimension

120×140×190 mm

 

Accumulated infusion volume

1.09999.0 ml

Maximum weight

2.0 kg

Infusion accuracy

±3

Displayed information

RATE

VOL.LIMIT

∑( accumulated infusion volume)

Battery charge indicator

AC power indicator

Over

OCCL.

AIR

BED No.

Alarm function

Over

OCCL.

Low battery

IV line installation error

AIR

EMPTY

Machine malfunction

Fuse

T 2AL 250V

KVO rate

1.0 ml/h-5.0 ml/h

Maximum power consumption

25VA, running more than 4 hours after being charged

Selectable modes

Rate mode, Time mode, Weight mode

Infusion rate range

1.0-2000 ml/h

Rate mode

1.02000.0 ml/h

Bolus

Rate:≤1000.0 ml/h

Bolus: 1000.0 ml/h

Time mode

Volume limit: 0.1999.9ml  Time: 12000 minutes

Operation conditions

Environment temperature 540, air pressure 86kPa106kPa, relative humidity ≤80%

Body Weight mode

Drug limit: 1.0999.9 mg, Volume limit: 0.1999.9 ml. Weight: 0.1300.0 kg, Dose: 0.19999.9

Selectable unit: mg/kg/h, ug/kg/min

Electrical Safety

Comply with EN60601-1 for medical equipment and EN60601-2-24

Battery

Rechargeable lithium polymer battery, 7.4V, 1600 mA

Applicable infusion sets

All standard IV sets

Storage

Environment temperature-2055, air pressure 50106kPa, relative humidity ≤95%

Product Code: SYT-603 Infusion pump

1. Four kinds of modes: Rate mode, Time mode, Body Weight mode, Drop Counter mode.
2. High-definition Large-screen color LCD, English language interface, making it more easier to operate.
3. Double CPU makes the process of infusion safer and more reliable.
4. Widely application scope of infusion rate, 1ml/h ~2000ml/h.
5. Drop Counter inspection and automatic control, automatic conversion between ml/hour and drop/minute, one-touch switch display.
6. Display of the drug names.
7. With data lock to prevent accidental modification of infusion parameters.
8. Display battery capacity.
9. Up and Down pressure sensors prevent free flow.
10. All standard brands of infusion pipes are applicable, press buttons for selection to achieve accurate, smooth and safe infusion.

 

Syringe Pump (12 models)

 

Product Code: SYT-A3 Micro-Infusion Syringe Pump

Main features:
• Wide flow rate range from 0.1 ml/h to 1500 ml/h
• Accepts syringe sizes from 10 ml - 100 ml
• Automatic accuracy calibration
• Adjustable occlusion pressure

Infusion rate range 10 ml syringe -------------------> 0.1-300 ml/h 50/60 ml syringe -------------------> 0.1-1200 ml/h
20/30 ml syringe ---------------> 0.1-500 ml/h 100 ml syringe ----------------------> 0.1-1500 ml/h
Bolus / Purge rate 10 ml syringe -------------------> 240 ml/h 50/60 ml syringe --------------------> 960 ml/h
20/30 ml syringe ---------------> 400 ml/h 100 ml syringe -----------------------> 1200 ml/h
Bolus volume Programmable from 1 to 10 ml
Flow rate increments 0.1-99 ml/h at 0.1 ml/h increments
100-1500 ml/h at 1ml/h increments
Accuracy ± 5% with syringe
Occlusion pressure 0.04 Mpa – 0.12 Mpa / 5.8 PSI – 17.4 PSI
Alarm volume High, Medium, Low
Safety protection Automatic keypad lock
Audible & visual alarms
Alarms NEAR EMPTY (syringe almost empty) Syringe disengaged
COMPLETE (Infusion completed) Mechanical error
OCCLUSION Power source change
LOW BATT  
Power supply AC 100-240V 50/60 Hz; DC 12V
Battery Built-in rechargeable sealed NiMH
Pump will operate 3 hours min. at 25 ml/h with fully charged battery
Net weight 1.85 Kg / 4 lbs
Dimensions 335 (L) x 142 (W) x 120 (H) mm / 13” (L) x 51½, ” (W) x 3 ½“ (H)
Product Code: SYT-A5 Portable PCA Syringe Pump

Great for home care or ambulatory treatment with low rate small volume such as:
• Thalassemia
• Neonatal care
• Immunity deficiency (globulin)
• Parkinson (Apokinon) etc.

Syringe Size 1 ml - 20 ml single-use syringe
Infusion Rate 1 mm/hr - 99 mm/hr
Alarms Battery depleted, mechanical error, occlusion, syringe disengaged, completion
Alerts Battery low, syringe not loaded, near end
PCA Bolus Maximum setting of bolus is 1/4 of the syringe size
OLED Display Syringe size; rate is set by mm/hr and displayed in ml./hr simultaneously; alarm messages
“LOW BATT” LED indicator On when battery is low or depleted
Dimension 166 (L) x 60 (B) x 30 (H) mm
Weight 180g (battery weight not included)
Maximum infusion pressure 0.12MPawith 10 ml syringe
Occlusion alarm pressure 0.12MPawith 10 ml syringe
Product Code: SYT-A7 Syringe Pump

Main features:
• 100 ml syringe pump capability
• Can load 20 ml, 50 ml and 100 ml disposable syringes
• Convenient time settings
• Automatic calculation of the flo w rate based on de fault time settings

Power supply AC 220/240V 50Hz (AC 150/135V 60Hz available if required)
Power consumption Less than 6VA
Applicable syringes 20ml, 30ml, 50ml, 60ml, 100ml disposable syringes; Compatible with major brand syringes
Time settings 4min, 8min, 12min, 16min, 20min
Infusion accuracy ± 20 sec
Flow rate 60ml/h - 1500ml/h
Automatic calculation of the delivery rate based on time pre-selection
Alarms NEAR END Audible
COMPLETE Visual
OCCLUSION  
LOW BAT  
Battery operations Continuouse operation of 15 pieces of 50ml syringe at 12 minutes setting with built-in rechargeable
Ni-MH battery
Included accesories Standard power cable
Dimensions 115 (D) x 366 (W) x 120 (H) mm / 4.53” (L) x 14.41, ” (W) x 4.72“ (H)
Net weight 1.8kg / 3.96lbs
Product Code: SYT-180 Syringe pump

*Compatible with syringes of any brand.
*Automatically calibration for syringes of any brand .
*Three working modes: Rate control mode,Time control mode and Dose-Weight control mode.
*Automatically detection of syringe types and settings.
*Wide range in delivery rate settings.
*8 Hours internal battery life in high capacity.
*Three levels of alarm volume: high, medium and low.
*Three levels of occlusion pressure: high, medium and low.
*KVO function:After infusion is complete, the pump automatically switches to the smallest flow to prevent creating the thrombus.

SPECIFICATIONS
Compatible Syringe: Any standard syringe with 10ml、20ml(30ml) and 50ml(60ml)
Accuracy: ±2% ( Any manufacturers of syringes, right after calibration )
Delivery Rate Range:
50ml(60ml):0.1ml/h~1800.0ml/h (0.1ml/h step)
20ml(30ml):0.1ml/h~800.0ml/h (0.1ml/h step)
10ml:0.1ml/h~400.0ml/h (0.1ml/h step)
Time Mode Range:
Volume:0.1~999.9ml (0.1ml step)
TIME:1~1999min (1min step)
Body Weight Mode Range:
Volume:0.1~999.9ml(0.1ml step)
DRUG MASS:0.1~999.9mg(0.1mg step)
DOSE:0.01~99.99ug/kg/min(0.01ug/kg/min step)
WEIGHT:0.1~300kg(0.1kg the least step)
Volume Limit Range: 0~1999.9ml (0.1 ml step)
Total Volume Range: 0.1~1999.9ml (0.1 ml step)
Rapid injection: 50ml(60ml):1800.0ml/h, 20ml(30ml):800.0ml/h, 10ml:400.0ml/h
KVO Rate: 1ml/h
Alarms:
Near empty, Syringe empty, Volume complete (a volume limit has been set ), Occlusion, Syringe loose, Operation error, Low battery and other device failures.
Power Supply:
AC power supply: AC 100 to 240V±10%,50/60Hz;
Internal Lithium Battery: 11.1V, 2000mAh. Approximately 8 hours of continuous operation on a new and fully charged battery running at 5ml/h.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type CF
Dimensions: 280mm(L)×160mm(W)×130mm(H)
Net Weight: Approximately. 3.0kg
Operating Conditions: Ambient temperature: 5 to 40℃ Relative humidity: 20 to 90%
Storage Condition: Ambient temperature: -10 to 55℃ Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual

Product Code: SYT-180D, Double channel syringe pump

*Automatically detection of syringe types and settings.
*Broad range in delivery rate settings.
*8 Hours internal battery life in high capacity.
*Three levels of alarm volume: high, medium and low.
*Three levels of occlusion pressure: high, medium and low.
*KVO function:After infusion is complete, the pump automatically switches to the smallest flow to prevent creating the thrombus.

CHARACTERISTIC
Compatible Syringe: Any standard syringe with 10ml、20ml(30ml) and 50ml(60ml)
Accuracy: ±2% ( Any manufacturers of syringes, right after calibration )Delivery Rate Range:
50ml(60ml):0.1ml/h~1800.0ml/h (0.1ml/h step)
20ml(30ml):0.1ml/h~800.0ml/h (0.1ml/h step)
10ml:0.1ml/h~400.0ml/h (0.1ml/h step)
Time Mode Range:
Volume:0.1~999.9ml (0.1ml step)
TIME:1~1999min (1min step)
Body Weight Mode Range:
Volume:0.1~999.9ml(0.1ml step)
DRUG MASS:0.1~999.9mg(0.1mg step)
DOSE:0.01~99.99ug/kg/min(0.01ug/kg/min step)
WEIGHT:0.1~300kg(0.1kg the least step)
Volume Limit Range: 0~1999.9ml (0.1 ml step)
Total Volume Range: 0.1~1999.9ml (0.1 ml step)
Rapid injection: 50ml(60ml):1800.0ml/h, 20ml(30ml):800.0ml/h, 10ml:400.0ml/h
KVO Rate: 1ml/h
Alarms: Near empty, Syringe empty, Volume complete(a volume limit has been set ), Occlusion, Syringe loose, Operation error, Low battery and other device failures.
Power Supply: AC power supply: AC 100 to 240V±10%,50/60Hz;
Internal Lithium Battery: 11.1V, 2000mAh. Approximately 8 hours of continuous operation on a new and fully charged battery running at 5ml/h.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type CF
Dimensions: 280mm(L)×160mm(W)×130mm(H)
Net Weight: Approximately. 3.0kg
Operating Conditions: Ambient temperature: 5 to 40℃ Relative humidity: 20 to 90%
Storage Condition: Ambient temperature: -10 to 55℃ Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual

Product Code: SYT-S501 syringe pump

● All standard syringes of 10ml, 20ml, 50ml are compatible. The machine diagnoses the syringe size automatically, and with a simple syringe specification setting, the syringe pump can guarantee an accurate and safe injection.
● Unique function of bedside injection supervision which makes patients and their relatives as well as  nurses more assured.
● Excellent injection function and operation. Even small-volume injection is accurate.
● Double CPU system ensures safe and reliable injection process.
● Driven by precision step motor, no pulsating waves shall occur during even low-rate injection.
● Accurate and sensitive pressure sensor detects occlusion pressure accurately.
● Alarms are given in case of malfunction or operation error and the machine stops operation automatically.

Dimension

288*130*122mm

 

Maximum weight

<3.0kg

Fuse

 

220V2A*2, 12V2A*2

 

Maximum Power consumption

25VA,running more than 5h after being fully charged.

Power supply(city electricity)

 

50/60HZ  AC100V~240V

 

Injection increment

 

 

0.1ml/h

Size of Syringes

10ml,20ml,50ml

Injection accuracy

±3%

Feasible injection rate range

 

10ml:0.1~100ml/h

20ml:0.1~200ml/h

50ml:0.1~500ml/h

 

Bolus

 

The fastest rate of the size of syringe in use

Electrical safety

 

Comply with the requirement of GB9706.1-1995,EN60601-1 and UL60601-1

Displayed information

Rate, accumulated injection volume, Syringe size Battery capacity, Bed No.,Ac power indicator, Battery charge indicator

EMC (Electromagnetic compatibility)

Comply with the requirement EN60601-1-1,EN60601-2-24

Operating conditions:

Environment temperature 5~45℃.air pressure 70~106kPa, relative humidity30%~90%

Alarm functions

Near, Over,OCCL.,low battery, syringe installation error, control abnormal, machine malfunction

Accumulated injection volume

 

0~999.9ml

 

Product Code: SYT-501A syringe pump

1、All standard syringes of 10ml, 20ml, 50ml(SYT-S501), 1ml, 5ml,10m(SYT-501A) are compatible. The machine diagnoses the syringe size automatically, and with a simple syringe specification setting, the syringe pump can guarantee an accurate and safe injection.
2、Unique function of bedside injection supervision which makes patients and their relatives as well as nurses more assured.
3、Excellent injection function and operation. Even small-volume injection is accurate.
4、Double CPU system ensures safe and reliable injection process.
5、Driven by precision step motor, no pulsating waves shall occur during even low-rate injection.
6、Accurate and sensitive pressure sensor detects occlusion pressure accurately.
7、Alarms are given in case of malfunction or operation error and the machine stops operation automatically.

Product Code: SYT-502  syringe pump

 Three kinds of modes: Rate Mode, Time Mode, Body Weight Mode.
 Double CPU, making the process of injection safer and more reliable.
 Accurate and sensitive pressure sensor detecting occlusion pressure accurately.
 Injection time, dose, solution can be checked during the process of injection.
 Precision step motor. There is no pulsating wave even during low-rate injection.
 KVO rate can be selectable according to concrete requirements from 0.1ml/h to 5ml/h.
 Excellent injection operation. The accuracy will be ensured even at small-volume injection.
 Unique injection supervision system ensures the safe injection and reduces the nurse’s workload.
 Accept all standard syringes of 5ml, 10ml, 20ml, 30ml and 50ml. It will self-diagnose and display the syringe size and set parameter automatically in the form of menu.
 Alarm is given when there is malfunction or operation error, and the machine stops running automatically.
 Save the preset volume automatically when there is unpredictable switch off, ensuring the accuracy of injection volume

Applicable syringes

All brands of standard syringes: 5ml,10ml,20ml,30ml,50ml

 

Weight

<3.0kg

 

Accuracy

±2

Dimension

380×190×180mm

 

Injection increment

0.1ml

Power supply

AC100~240V, 50/60Hz

 

Occlusion value

40kPa~160kPa

Fuse

T2AL250V~

 

Injection rate

5ml: 0.1 ml/h -100ml/h   30ml: 0.1 ml/h -600ml/h

10ml: 0.1 ml/h -200ml/h  50ml: 0.1 ml/h -1500ml/h

20ml: 0.1 ml/h -400ml/h      

Maximum power consumption

25W, can run for 4h after being recharged

 

Battery

Rechargeable lithium polymer battery, 7.4V, 1600mAh

 

Accumulated injection volume

0.1ml~9999.9ml

 

Battery recharge

When the pump is connected to the AC power supply, turn on the power and the battery will automatically recharge (about 8~14 hours to recharge fully.)

Modes of operation

Selectable: Rate mode, Time mode, Body Weight mode

 

Time mode

Volume limit: 0.1~999.9ml  Time: 1~2000 minutes

 

Electrical safety

 

Comply with the stipulation of IEC60601-1: 1996

 

Body weight mode

Drug limit:0.1~999.9mg, Solution limit:0.1~999.9ml, Weight: 01~300.0kg, Dose: 0.1~9999.9 mg/kg/h, ug/kg/min

 

Electromagnetic compatibility 

Comply with the stipulation of IEC60601-1-2: 2006

 

Displayed information

Rate, volume limit, accumulated injection volume, syringe size, pressure value, battery capacity, unit of medical dosage, bed No., AC power indicator, battery charge indicator, drug name, bolus rate

Shell material

ABS plastic

 

Classification

II Class-BF

 

Alarm function

OVER, NEAR, Occlusion, Low battery, Syringe disengaged, No AC power supply, serious low battery

Operating conditions

Environment temperature 5°C ~40°C, air pressure 80kPa ~106kPa, relative humidity 80%

 

Storage conditions

Environment temperature -40°C~55°C, air pressure 50kPa ~106kPa, relative humidity 95%

 

KVO rate

0.1ml/h-5.0ml/h (selectable)

Applied standards

IEC60601-1: 2005

IEC60601-2-24: 1998

IEC60601-1-2: 2006

ISO780-1997

ISO15223: 2000

ISO7886-1: 1993

ISO / IEC: Guide No. 37Consumer Goods Usage Instructions

 

Bolus rate

5ml: 100ml/h

10ml: 200ml/h

20ml: 400ml/h

30ml: 400ml/h-600ml/h

50ml: 400ml/h-1500ml/h

 
Product Code: SYT-503  syringe pump

● Double-channels(multi-channels), sub-rate injection.
● Four kinds of injection modes: Rate mode, Time mode, Body Weight mode,
  link mode.
● Innovative design of outer appearance gives a strong sense of science and
  technology.
● Double CPU makes the process of injection safer and more reliable.
● The use of TFT color LCD makes the screen display more remarkable.
● Digital menu, easy operation; functions fully meet the clinical demand.
● Integrative pump device makes more smooth operation and easier installation and maintenance.
● Brand-new STM32 ARM-Cortex M3 platform, optimized circuit design, operation rate
 more faster and stable.
● Ample and user-friendly indicator information; accurate and complete alarm
  information to ensure safe injection.
● Unique wireless infusion supervision function, achieving accurate infusion and synchronization infusion supervision to patients.

Max. injection rate

1500ml/hDifferent injectors have different maximum rate.

Accumulated volume

0.1ml999.9ml

Max. size of outer shell

320 mm×200 mm×110 mmlength×width×height

Injection accuracy

±3 ( up to +1% after calibration.)

Applicable injectors     

5, 10, 20, 30, 50ml

Injection increment

0.1ml/h

Battery

AC 100240V,50/60Hz

Volume limit

0.1ml999.9ml

Battery recharge

Rechargeable Lithium Polymer battery, 7.4V, 1600mA

Classification

Class, Type BF

Max. power consumption

Single-channel works for continuous 5 hours at the rate of 25ml/h after fully recharged; double-channels works for continuous 3 hours at the rate of 25ml/h after fully recharged.

Range of flow rate

5ml injector 0.1ml/h100ml/h     10ml injector0.1ml/h200ml/h 

20ml injector0.1ml/h400ml/h      30ml injector0.1ml/h600ml/h  

50ml injector0.1ml/h1500ml/h 

Bolus rate

5ml injector 100ml/h          10ml injector200ml/h           

20ml injector400ml/h           30ml injector400600ml/h adjustable    

50ml injector4001500ml/hadjustable

Alarm information

Near completion, completion, OCCL., injector off, low voltage, No AC Power supply, communication error, link abnormal, pump stuck, reading error of the parameters, etc.

Mode selection

1. Rate mode   2. Time mode   3. Body Weight mode   4. Link mode

Rate mode

Rate0.1ml/h1500.0ml/hMax. value depends on injector specification

Time mode

Volume0.1ml999.9ml       Time1min.2000 min.

Body Weight mode

Weight0.1kg300.0kg   drug0.1mg999.9mg   volume0.1ml999.9ml

dose0.11500.0 (restricted to unit, drug, solution, weight and injector)

Unitmg/kg/h, ug/kg/min

OCCL. value

40Kpa160Kpadisplay the voltage status and the pressure value.

KVO rate

Adjustable range0.1ml/h5.0ml/hadjustable: 0.1ml/h per each segmentpress “0” to cancel KVO function.

Product Code: SYT-503A  syringe pump

Four Channels Syringe Pump
Features and Functions:
1. Four Channels, sub-rate injection.
2. Four kinds of injection modes: Rate mode, Time mode,Body Weight mode, link mode.
3. Innovative design of outer appearance gives a strong sense of science and technology.
4. Double CPU makes the process of injection safer and more reliable.
5. Brand-new STM32 ARM-Cortex M3 platform, optimized circuit design, operation rate more faster and stable.
6. The use of TFT color LCD makes the screen display more remarkable.
7. Digital menu, easy operation; functions fully meet the clinical demand.
8. Ample and user-friendly indicator information; accurate and complete alarm information to ensure safe injection.
9 Aluminum alloy base, integrative pump device makes more smooth operation and easier installation and maintenance.

Product Code: SYT-503B  syringe pump

Six Channels Syringe Pump
Features and Functions:
1. Six Channels, sub-rate injection.
2. Four kinds of injection modes: Rate mode, Time mode,Body Weight mode, link mode.
3. Innovative design of outer appearance gives a strong sense of science and technology.
4. Double CPU makes the process of injection safer and more reliable.
5. Brand-new STM32 ARM-Cortex M3 platform, optimized circuit design, operation rate more faster and stable.
6. The use of TFT color LCD makes the screen display more remarkable.
7. Digital menu, easy operation; functions fully meet the clinical demand.
8. Ample and user-friendly indicator information; accurate and complete alarm information to ensure safe injection.
9 Aluminum alloy base, integrative pump device makes more smooth operation and easier installation and maintenance.

Product Code: SYT-503C  syringe pump

Multi-Channels Syringe Pump
Features and Functions:
1. Multi-channels(Eight-channels), sub-rate injection.
2. Four kinds of injection modes: Rate mode, Time mode,Body Weight mode, link mode.
3. Innovative design of outer appearance gives a strong sense of science and technology.
4. Double CPU makes the process of injection safer and more reliable.
5. Brand-new STM32 ARM-Cortex M3 platform, optimized circuit design, operation rate more faster and stable.
6. The use of TFT color LCD makes the screen display more remarkable.
7. Digital menu, easy operation; functions fully meet the clinical demand.
8. Ample and user-friendly indicator information; accurate and complete alarm information to ensure safe injection.
9 Aluminum alloy base, integrative pump device makes more smooth operation and easier installation and maintenance.